|
Outdoor Humidity Sensor (OHS)
The sensor device serves to
control and monitor relative humidity (humidifying and dehumidifying
equipment) and/or temperature (heating and cooling systems)
e.g. in ventilation and air conditioning ducts, laboratories,
production facilities, climate test chambers, indoor swimming
pools, greenhouses, etc.
The universal surface-mounted
humidity sensors are used to determine various measured variables
of humidity measurement technology and convert them into a standard
signal of 0-10 V or 4...20 mA. Many device groups can also display
other parameters: relative humidity [% r. h.], absolute humidity
[g/ m³], mixing ratio [g/ kg], dew point temperature [°C],
enthalpy [kJ/ kg] and ambient temperature [°C].
Duct humidity- and temperature sensors (± 1.8 % ? ±
2.0 %), incl. mounting flange, for mixture ratio, relative ?
absolute humidity, dew point, enthalpy and temperature, calibratable,
with Modbus connection or W-Modbus (wireless)
Calibratable duct humidity and temperature sensor - Modbus -
T3 (± 2.0%) or KFTF - 20 - Modbus - T3 (± 1.8%),
with Modbus connection, in an impact-resistant plastic housing
with quick-locking screws, optionally with ? without display,
with a plastic sinter filter, sintered porous plastic materials
offer excellent chemical compatibility, exceptional strength
and are resistant to most acids, bases, (exchangeable), incl.
mounting flange, to exactly detect the relative humidity (0
100%
RH) and the temperature (-35...+80 °C) and to detect various
parameters in humidity measurement. International system of
units SI (default) can be switched to Imperial (via Modbus).
With Modbus device version, the W-Modbus (wireless) replaces
the RTU cable; the BMS connection is radio-based using a W-Modbus
gateway. The duct sensor is applied in a non-aggressive, dust-free
environment and is suitable for installation in ceilings, ducts
and devices. It is used in the refrigeration, air conditioning
and clean room technology, engineering rooms, hotels and conference
facilities. A long-term stable, digital humidity and temperature
sensor guarantee exact measurement results. These measurands
are used to internally calculate the following parameters that
can be retrieved via Modbus: relative humidity, absolute humidity,
mixture ratio, dew point, enthalpy (ignoring atmospheric air
pressure) and ambient temperature. Innovative Modbus sensor
with galvanically isolated RS485 Modbus interface, switchable
bus terminating resistor, DIP switch for setting in de-energised
state, internal LEDs for telegram status indication, Push terminals
and large three-line display (illuminated, individually programmable).
The sensor is factory-calibrated; an environmental precision
adjustment by an expert is possible.
WHY RELATIVE HUMIDITY SENSORS ARE SO IMPORTANT FOR HVAC
|
|
Enclosure:
Plastic, UV-stabilised, material Polyamide,
30 % glass-globe reinforced, with quick-locking screws (slotted
? Phillips head combination), colour traffic white (similar to
RA 9016), enclosure, IP67/69 Rating.
The universal on-wall sensor is
used to determine various characteristic variables in humidity
measurement. It is used to measure the relative humidity and the
temperature of the
surrounding air. These measurands are used to calculate various
parameters internally. The Mod can be used to retrieve the following
parameters: relative humidity [% r. H.],
absolute humidity [g ? m³], mixture ratio [g ? kg], dew point
temperature [°C], enthalpy [kJ ? kg] (ignoring atmospheric
air pressure) and ambient temperature [°C].
|